Abstract




 
   

IJE TRANSACTIONS B: Applications Vol. 31, No. 8 (August 2018) 1274-1282    Article in Press

PDF URL: http://www.ije.ir/Vol31/No8/B/16-2777.pdf  
downloaded Downloaded: 3   viewed Viewed: 451

  TRANSIENT ENTROPY GENERATION ANALYSIS DURING WUSTITE PELLET REDUCTION TO SPONGE IRON
 
A. Zare Ghadi, M. S. Valipour and M. Biglari
 
( Received: July 28, 2017 – Accepted in Revised Form: January 23, 2018 )
 
 

Abstract    The present study carefully examined entropy generation during wustite pellet reduction to sponge iron. The finite volume method was used to solve the governing equations. The grain model was used to simulate the reaction rate. The reactant gases including carbon monoxide and hydrogen were converted to water and carbon dioxide after wustite reduction. Entropy is generated by heat transfer, mass transfer and chemical reactions. The rate of entropy generation is studied over a period of 150 minutes. Based on the governing equations, the share of each process in the generation of entropy was calculated. The effects of gas ratio, porosity, and tortuosity and grain diameter of wustite pellet on entropy generation were investigated. The porosity was changed from 0.2 to 0.5, tortuosity from 1 to 4, grain diameter from 7 to 20 mm and the ratio of reducing gas from 0.5 to 2. According to the results maximum value of entropy generation nearly occurs during first 20 minutes of the reduction process. It is shown that the heat transfer had the highest contribution to entropy generation. The results also indicates porosity and gas ratio are inversely proportional to the rate of entropy generation while tortuosity and grain diameter are directly proportional to entropy generation rate.

 

Keywords    Wustite Pellet, Entropy Generation, Mathematical Model, Grain Model

 

چکیده    در کار حاضر تولید آنتروپی در طول فرایند احیای گندله وستیتی به آهن اسفنجی مورد مطالعه قرار گرفته است. روش حجم محدود برای حل معادلات حاکم استفاده شده است. مدل دانه‏ای برای شبیه‏سازی نرخ واکنش مورد استفاده قرار گرفته است. پس از اتمام فرایند احیای وستیت گازهای احیا شامل مونوکسیدکربن و هیدروژن به آب و دی کسیدکربن تبدیل می‏شوند. آنتروپی از طریق انتقال حرارت، انتقال جرم و واکنش‏های شیمیایی تولید می‏شود. نرخ تولید آنتروپی در طول زمان 150 دقیقه بررسی می‏شود. بر اساس معادلات حاکم، سهم هر فرایند در تولید آنتروپی محاسبه شده است. تاثیرات نسبت گاز، تورچیاسیتی و قطر دانه وستیتی بر روی تولید آنتروپی بررسی شده است. تخلخل در بازه 2/0 تا 5/0، تورچیاسیتی در بازه 1 تا 4، قطر ذرات در بازه 7 تا 20 میلیمتر و نسبت گاز در بازه 5/0 تا 2 متغیر است. بر طبق نتایج بیشینه مقدار تولید آنتروپی تقریبا در 20 دقیقه ابتدایی رخ می‏دهد. مشاهده شده است که انتقال حرارت بیشترین سهم در تولید آنتروپی را دارد. همچنین نتایج نشان می‏دهند، تخلخل و نسبت گاز رابطه عکس با نرخ تولید آنتروپی دارد در حالیکه تورچیاسیتی و قطر دانه با نرخ تولید آنتروپی رابطه مستقیم دارد.

References   

1.     Valipour, M. and Mokhtari, M., "Effect of water gas shift reaction on the non-isothermal reduction of wustite porous pellet using syngas", International Journal of Iron & Steel Society of Iran,  Vol. 8, No. 2, (2011), 9-15.

2.     von Bogdandy, L. and Engell, H.-J., "The reduction of iron ores: Scientific basis and technology, Springer Science & Business Media,  (2013).

3.     McKewan, W., "Influence movement during high pressure reaction of hematite by hydrogen", J. Metals,  Vol. 16, No., (1964), 781-802.

4.     Turkdogan, E. and Vinters, J., "Gaseous reduction of iron oxides: Part i. Reduction of hematite in hydrogen", Metallurgical and Materials Transactions B,  Vol. 2, No. 11, (1971), 3175-3188.

5.     Usui, T., Ohmi, M. and Yamamura, E., "Analysis of rate of hydrogen reduction of porous wustite pellets basing on zone-reaction models", ISIJ International,  Vol. 30, No. 5, (1990), 347-355.

6.     Valipour, M. and Khoshandam, B., "Numerical modelling of non-isothermal reduction of porous wustite pellet with syngas", Ironmaking & Steelmaking,  Vol. 36, No. 2, (2009), 91-96.

7.     Ghadi, A.Z., Valipour, M.S. and Biglari, M., "Mathematical modelling of wustite pellet reduction: Grain model in comparison with uscm", Ironmaking & Steelmaking,  Vol. 43, No. 6, (2016), 418-425.

8.     Ariyan, Z.G., SADEGH, V.M. and Mojtaba, B., "Numerical analysis of complicated heat and mass transfer inside a wustite pellet during reducing to sponge iron by h2 and co gaseous mixture", Journal of Iron and Steel Research, International,  Vol. 23, No. 11, (2016), 1142-1150.

9.     Szekely, J., "Gas-solid reactions, Elsevier,  (2012).

10.   Valipour, M.S. and Saboohi, Y., "Modeling of multiple noncatalytic gas–solid reactions in a moving bed of porous pellets based on finite volume method", Heat and Mass Transfer,  Vol. 43, No. 9, (2007), 881-894.

11.   Hirschfelder, J.O., Curtiss, C.F., Bird, R.B. and Mayer, M.G., "Molecular theory of gases and liquids, Wiley New York,  Vol. 26,  (1954).

12.   Bejan, A., "Advanced engineering thermodynamics, John Wiley & Sons,  (2016).

13.   Bejan, A., "Second law analysis in heat transfer", Energy,  Vol. 5, No. 8-9, (1980), 720-732.

14.   Bejan, A., "Entropy generation through heat and fluid flow, Wiley,  (1982).

15.   Bejan, A., "The thermodynamic design of heat and mass transfer processes and devices", International Journal of Heat and Fluid Flow,  Vol. 8, No. 4, (1987), 258-276.

16.   San, J., Worek, W. and Lavan, Z., "Entropy generation in convective heat transfer and isothermal convective mass transfer", Journal of Heat transfer,  Vol. 109, No. 3, (1987), 647-652.

17.   Arpaci, V.S. and Selamet, A., "Entropy production in flames", Combustion and flame,  Vol. 73, No. 3, (1988), 251-259.

18.   Shamsi, M. and Nassab, S.G., "Ivestigation of entropy generation in 3-d laminar forced convection flow over a backward facing step with bleeding", International Journal of Engineering-Transactions A: Basics,  Vol. 25, No. 4, (2012), 379-388.

19.   Ziapour, B. and Rahimi, F., "Numerical study of natural convection heat transfer in a horizontal wavy absorber solar collector based on the second law analysis", International Journal of Engineering-Transactions A: Basics,  Vol. 29, No. 1, (2016), 109-117.

20.   Dash, S. and Som, S., "Transport processes and associated irreversibilities in droplet combustion in a convective medium", International Journal of Energy Research,  Vol. 15, No. 7, (1991), 603-619.

21.   Puri, I.K., "Second law analysis of convective droplet burning", International journal of heat and mass transfer,  Vol. 35, No. 10, (1992), 2571-2578.

22.   Hiwase, S., Datta, A. and Som, S., "Entropy balance and exergy analysis of the process of droplet combustion", Journal of Physics D: Applied Physics,  Vol. 31, No. 13, (1998), 1601-1610.

23.   Pope, D.N., Raghavan, V. and Gogos, G., "Gas-phase entropy generation during transient methanol droplet combustion", International Journal of Thermal Sciences,  Vol. 49, No. 7, (2010), 1288-1302.

24.   DeHoff, R., "Thermodynamics in materials science", CRC Press,  (2006).

25.   Versteeg, H.K. and Malalasekera, W., "An introduction to computational fluid dynamics: The finite volume method, Pearson Education",  (2007).

26.   Valipour, M., "Mathematical modeling of a non-catalytic gas-solid reaction: Hematite pellet reduction with syngas", Scientia Iranica. Transaction C, Chemistry, Chemical Engineering,  Vol. 16, No. 2, (2009), 108-124.


Download PDF 



International Journal of Engineering
E-mail: office@ije.ir
Web Site: http://www.ije.ir