Abstract




 
   

IJE TRANSACTIONS A: Basics Vol. 31, No. 1 (January 2018) 17-22    Article in Press

PDF URL: http://www.ije.ir/Vol31/No1/A/3.pdf  
downloaded Downloaded: 0   viewed Viewed: 83

  SYNTHESIS AND CHARACTERIZATION OF PORCELAIN BODY DEVELOPED FROM RICE HUSK ASH (TECHNICAL NOTE)
 
Mst. Sharmin M. Mostari, T. Zaman, A. Sen and Md. Rahat Al Hassan
 
( Received: August 09, 2017 – Accepted: October 12, 2017 )
 
 

Abstract    The work was confined on the synthesis and characterization of porcelain body by incorporating 25% rice husk ash as a substitute of quartz. Three different calcination temperatures (700, 800 and 900oC) were chosen for the conversion of rice husk (RH) to rice husk ash (RHA). True density measurement and phase identification of RHA was conducted to ensure the quality of raw material. Calcination at 900oC-3 hours provided the preferred quality of RHA. Green samples for the porcelain body were prepared by a homogenous mixture of clay, feldspar, quartz and RHA, followed by densification at 950, 1050 and 1150oC for constant soaking time of 1 hour. The effect of calcination as well as sintering profile on the densification of porcelain body was evaluated. Finally physical, mechanical and morphological characterizations were done. The investigation revealed 1050oC as the optimum sintering temperature for 25% quartz substituted product.

 

Keywords    Porcelain Body, Rice Husk, SEM, Sintering, XRD

 

References    [1]             Jamo, H. J. and Maharaz, “Influence of addition of rice husk ash on porcelain composition”, Science World Journal , Vol. 10,  No. 1, (2015). [2]             Bondioli, F., Andreola, F., Tiziano Manfredini, L. B. T. and Ferrari, A. M., “Effect of Rice Husk Ash (RHA) in the synthesis of (Pr,Zr)SiO4 ceramic pigment”, Journal of the European Ceramic Society ,Vol. 27, (2007), 3483-3488. [3]             Modi, A. V., Bhardwaj, Choudhary,  R., Sharma, D. and Singh, Dr.  P., “Preparation & characterization of  vitrified tiles using rice husk ash & glass cullet”, Journal of Emerging Technologies and Innovative Research (JETIR), Vol. 3, No. 5,  (2016). [4]             Serra, M. F., Conconi, M. S., Gauna, M. R., Suarez, G., Aglietti, E. F., and Rendtorff, N. M., “Mullite (3Al2O3·2SiO2) ceramics obtained by reaction sintering of rice husk ash and alumina, phase evolution, sintering and microstructure,” Journal of Asian Ceramic Societies, Vol. 4, (2016),  61–67. [5]             Sultana, M. S., Hossain, M. I., Rahman, M. A. and Khan, M. H., “ Influence of rice husk ash and fly ash on properties of red clay”, Journal of Scientific Research, Vol. 6, No. 3, (2014),  421-430. [6]             Mehta, P. K., “Concrete structure, properties and materials”, Prentice-hall, Eaglewood Cliffs, N. J., (1986). [7]             Otaru, A. J., Ameh, C. U., Abdulkareem, A. S., Odigure, J. O. and Okafor, J. O., “Development and characterization of adsorbent from rice husk ash to bleach vegetable oils”, Journal of Applied Chemistry, Vol. 4, No. 2, (2013), 42-49. [8]             Madrid, R., Nogueira, C. A. and Margarido, F., “Production and characterization  of  amorphous silica from rice husk waste”, in 4th International Conference on Engineering for Waste and Biomass Valorisation, Porto, Portugal, (2012). [9]             Ossi, C. D., “Potassium oxide analysis in rice rusk ash at various combustion conditions using Proton-Induced X-ray Emission (PIXE) spectrometric technique”, International Journal of Applied Chemistry, Vol. 12, No. 3, (2016), 281-291. [10]        Chandrasekar, Satyanarayana and Raghavan, “Processing, properties and applications of reactive silica from rice husk-An Overview”, Journal of Materials Science, Vol. 38, (2003), 3159. [11]        Confidential Report, “Rice Husk Ash Market Study,” 2003 http:// webarchives.nationalarchives.gov.uk. [12]        Ikram, N. and Akhter, M., “X-Ray diffraction analysis of silicon prepared from  rice husk ash”, Journal of Materials Science, Vol. 23, (1998), 2379 - 2381. [13]        Romero and Reinoso, “Synthesis SiC from rice husk catalyzed by iron, cobalt or nikel”, Journal Materials Science, Vol. 31, (1996),  779 – 784. [14]        Rahman, “Preparation of  Si3N4 by corbothermal reduction of digested rice husk”, Ceramic International, Vol. 20, (1994), 195 – 199. [15]        Gorthy, P. and Pudukottah, G. M., “Production of silicon carbide from rice husks”,  Journal of the American Ceramic Society, Vol. 82, No. 6, (1999), 1393-1400. [16]        Real, C., Alcala, M. D. and Criado, J. M., “Synthesis of silicon nitride from carbothermal reduction of rice husks by the Constant-Rate-Thermal-Analysis (CRTA) method”, Journal of the American Ceramic Society, Vol. 87, No. 1, (2004), 75-78. [17]        Bose, Acharya  and Banerjee, “Electrical, thermal thermoelectric and related of magnesium silicate semiconductor prepared from rice husk”, Journal of Material Science, Vol. 28, (1993), 5461-5468. [18]        Chatterjee, M. and Naskar, M. K., “Sol-Gel synthesis of lithium aluminium silicate powders; The effect of silica sources”, Ceramic International, Vol. 32, (2006), 623 – 632. [19]        Kato, “Recycling waste husk into road construction material”, Mon. Waste, Vol. 26, (2000), 68-71. [20]        Real, Alcala and Criado, “Preparation of silica from rice husk”, Journal of American Ceramic Society, Vol. 79, (1996). [21]        Choi, Mori and Ohama, “Development of rice husks-plastics composites for building materials”,  Waste Manage, Vol. 26, (2006), 189-194. [22]        Sembiring, S. and Manurung, P., “Synthesis and characteriztion of cordierite (Mg2Al4Si5O18) ceramics based on the rice husk silica”, FMIPA UNILA, (2009). [23]        Oyetola, E. B. and Abdullahi, M., “The use of rice husk ash in low-cost sandcrete block production”, Leonardo Electronic J. Pract. Tech. (Romania), Vol. 8, (2006), 58-70. [24]        Oyekan, G. L. and Kamiyo, O. M., “Effect of nigerian rice husk ash on some engineering properties of sandcrete blocks and concrete”, Research Journal of Applied Sciences, Vol. 3, No. 5, (2008),  345-351. [25]        Igwebike-Ossi, C. D., “Rice husk ash as new extender in textured paint”, Journal of Chemical Society of Nigeria, Vol. 37, No. 1, (2012), 72-75. [26]        Igwebike-Ossi, C. D., “Rice husk ash as new flatting extender in red oxide primer”,  Journal of Chemical Society of Nigeria, Vol. 37, No. 2, (2012), 59-64. [27]        Igwebike-Ossi, C. D., “Rice husk ash as flatting extender in cellulose matt paint”,  American Journal of Applied Chemistry, Vol. 2, No. 6, (2014), 122-127. [28]        Igwebike-Ossi, C. D., “Pigment extender properties of  rice husk ash in emulsion paint”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 4, No. 8, (2015), 6821-6829. [29]        Andreola, F., Barbieri, L. and Bondioli, F., “Agricultural waste in the synthesis of coral ceramic pigment”, Dyes and Pigments, Vol. 94, (2012), 207–211. [30]        Wattanasiriwech, D., Polpuak, N., Danthaisong, P. and Wattanasiriwech, S., “Use of  rice husk ash for quartz substitution in stoneware glazes”, Journal of Scientific and Industrial Research, Vol. 67, No. 6, (2008), 455–460. [31]        Bondioli, F., Barbieri, L., Ferrari, A. M. and Manfredini, T., “Characterization of rice husk ash and its recycling as quartz substitute for the production of ceramic glazes”, Journal of the American Ceramic Society, Vol. 93, No. 1, (2008), 121–126. [32]        Ohoke, F. O. and Igwebike-Ossi, C. D., “Formulation and performance evaluation of wood adhesives produced with rice husk ash as new filler”, American Journal of Applied Chemistry, Vol. 3, No. 2, (2015), 33-39. [33]        Ohoke, F. O. and Igwebike-Ossi, C. D., “Formulation and performance characterization of ceramic tile adhesive produced with acacia gum”, International Journal of Innovation Sciences and Research, Vol. 4, No. 6, (2015), 258-261. [34]        Saravanan, M. M. and Sivaraja, M., “Mechanical behavior of concrete modified by replacement of cement by rice husk ash”,  Braz. Arch. Biol. Technol., Vol. 59, (2016). [35]        Tonnayopas, D., Tekasakul,  P. and Jaritgnam, S., “Effect of rice husk ash on characteristics of lightweight clay brick”, in conference of  Technology and Innovation for Sustainable Development, Khon Kaen University, Thailand, Vol. 28-29, (2008), 36-39. [36]        Prasad, C. S.,  Maiti , K. N.,  Venugopal, R., “Effect of  rice husk ash in whiteware compositions”, Ceramics International, Vol. 27, (2001), 629-635. [37]        Ali, M. S., Hanim, M. A. A., Tahir, S. M., Jaafar, C. N. A., Norkhirunnisa, M. and Matori, K. A., “Preparation and characterization of porous alumina ceramics using different pore agents”,  Journal of the Ceramic Society of Japan,  Vol. 125, No.  5, (2017), 402-412. [38]        Noh M. Z., Jamo, H. U. and Ahmad, Z. A., “Enhancing bending strength of  porcelain affected by RHA at different mould pressure”, Journal of Engineering and Applied Sciences, Vol. 11, No. 18, (2016). [39]        Bhardwaj, A., Hossain, S. K. S. and Majhi, M. R., “Preparation and characterization of cay bonded high strength silica refractory by utilizing agriculture waste”, Bol. Soc. Esp. Ceram. Vidr., (2017), In press.  


Download PDF 



International Journal of Engineering
E-mail: office@ije.ir
Web Site: http://www.ije.ir