IJE TRANSACTIONS A: Basics Vol. 31, No. 4 (April 2018) 605-611    Article in Press

PDF URL: http://www.ije.ir/Vol31/No4/A/12-2738.pdf  
downloaded Downloaded: 28   viewed Viewed: 350

Z. Benmamoun, H. Hachimi and A. Amine
( Received: January 04, 2017 – Accepted in Revised Form: January 04, 2018 )

Abstract    The goal of supply chain management is to provide products with best quality, low costs and shortest delay of delivery corresponding to customers’ expectations. To ensure that, companies must be in continuous research for management methodologies which allows them the possibility to improve their financial results by decreasing costs and improving their process and thus customers satisfaction. Before searching for a metaheuristic function of the optimal solutions, this paper is presenting a basic research, conducted in aeronautic company to find out the better solution for raw material inventory management. These raw materials are obtained from the supply of imports and some local purchases. The aims of study are to present a comparison of inventory deterministic models, the economic order quantity, the Interval order quantity and the minimum maximum inventory. The first step is to collect data’s containing 3896-part number with various suppliers, lead time, costs, consumption, holding cost and set up cost, the second step is calculating the order quantity with deterministic models and analyzing the results to choose the better solution. The third step is doing the ABC classification and comparing the amount of average stock between the three methods. The results show that the optimal deterministic solution is a combination of two of them.


Keywords    Inentory Comparison; Inventory Management; Economic Order Quantity; Interval Order Quantity


چکیده    هدف از مدیریت فروشگاههای زنجیره­ای مهیا نمودن فرآورده­ها با بهترین کیفیت و هزینه پائین در کوتاهترین مدت تحویل طبق خواست مشتریان است. براین اساس جهت جلب رضایت مشتریان شرکت باتکنولوژی مدیریرت می­تواند عملکرد مالی را بهبود بخشد و هزینه­ها را کاهش دهد. قبل از دستیابی به حل مطلوب این مقاله مبانی تحقیق برای بهترین راه حل برای مدیریت مواد اولیه را بررسی می­نماید. این مواد اولیه از شرکتهای تدارکاتی یا پشتیبانی خریداری می­شوند. هدف از این تحقیق ارائه الگوها برای سفارشات کمی است بر حسب حداقل و حداکثر سفارشات است. در اولین گام داده­ها از 3896 شماره قطعه با شرکتهای تدارکاتی متفاوت، زمان، هزینه، مصرفی، زمان نگهداری و هزینه نمایش جمع آوری گردید. در گام دوم محاسبات کمیت سفارش طبق الگو تعیین شده و انالیز نتایج برای انتخاب بهترین گزینه بعمل می­آید. در سومین گام طبقه بندی الفبایی و مقایسه مقدار میانگین ذخیره در میان سه روش اجرا می­گردد. نتایج نشان می­دهد که بهترین راه حل در دو روش ترکیبی بدست می­آید.


1.     Raheman, A. and Nasr, M., "Working capital management and profitability–case of pakistani firms", International Review of Business Research Papers,  Vol. 3, No. 1, (2007), 279-300.

2.     Bian, Y., Bostel-Dejax, N., Lemoine, D., Yeung, T., Hovelaque, V. and Viviani, J.-l., "Dynamic lot-sizing-based working capital requirement minimization model with infinite capacity", in Industrial Engineering and Systems Management (IESM), 2015 International Conference on, IEEE., (2015), 1048-1054.

3.     Hnaien, F., "Gestion des stocks dans des chaînes logistiques face aux aléas des délais d'approvisionnements", Ecole Nationale Supérieure des Mines de Saint-Etienne,  (2008),

4.     Zariyawati, M., Taufiq, H., Annuar, M. and Sazali, A., "Determinants of working capital management: Evidence from malaysia", in Financial Theory and Engineering (ICFTE), 2010 International Conference on, IEEE., (2010), 190-194.

5.     Russell, R.S. and Taylor-Iii, B.W., "Operations management along the supply chain, John Wiley & Sons,  (2008).

6.     Sboui, S., "Unsold and excess inventory: Between optimization and management: A new challenge for the supply chain management", in Service Systems and Service Management, 2006 International Conference on, IEEE. Vol. 1, (2006), 283-289.

7.     Ahmadvand, A., Asadi, H. and Jamshidi, R., "Impact of service on customers’demand and members’profit in supply chain",  International Journal of Engineering, TRANSACTIONS C: Aspects Vol. 25, No. 3, (2012) 213-222.


8.     Akhbari, M., Mehrjerdi, Y.Z., Zare, H.K. and Makui, A., "A novel continuous knn prediction algorithm to improve manufacturing policies in a vmi supply chain", International Journal of Engineering-Transactions B: Applications,  Vol. 27, No. 11, (2014), 1681-1689.

9.     Parsa, M., Mollaverdi-Esfahani, N., Alinaghiana, M. and Tavakkoli-Moghaddam, R., "Introducing the time value of money in a non-consignment vendor managed inventory model", International Journal of Engineering, Transactions B: Applications,  Vol. 29, No. 5, (2016), 637-645.

10.   Jain, M., Sharma, G. and RATHORE, S., "Economic production quantity models with shortage, price and stock-dependent demand for deteriorating items",  International Journal of Engineering (IJE) Transactions A: Basics, Vol. 20, No. 2, (2007), 159-168.

11.   Bendavid, I., Herer, Y.T. and Yücesan, E., "A simulation based investigation of inventory management under working capital constraints", in Simulation Conference (WSC), 2014 Winter, IEEE., (2014), 1919-1930.

12.   Cherrafi, A., Elfezazi, S., Chiarini, A., Mokhlis, A. and Benhida, K., "The integration of lean manufacturing, six sigma and sustainability: A literature review and future research directions for developing a specific model", Journal of Cleaner Production,  Vol. 139, (2016), 828-846.

13.   Harris, F., "How many parts to make at once, factory, the magazine of management, vol. 10",  The Magazine of Management ,10(1913), 135-136..

14.   Tripathi, R. and Uniyal, A.K., "Eoq model with cash flow oriented and quantity dependent under trade credits", International Journal of Engineering-Transactions A: Basics,  Vol. 27, No. 7, (2014), 1107-1115.

15.   Abdullah, N.K., Mawardi, M.A.N.M. and Rashid, R.A., "Economic order quantity (EOQ): An alternative at routine maintenance company", in Business Engineering and Industrial Applications Colloquium (BEIAC), IEEE., (2013), 739-744.

16.   Sarjono, H. and Aryanto, R., "Comparison of optimal calculation of inventories", in Technology Management and Emerging Technologies (ISTMET), 2014 International Symposium on, IEEE., (2014), 90-93.

17.   Jiang, Q., Zhong, W. and Hu, Y., "The construction of conceptual model of working capital management based on scm", in Future Information Technology and Management Engineering (FITME), 2010 International Conference on, IEEE. Vol. 1, (2010), 338-341.

18.   Slack, N., Chambers, S. and Johnston, R., "Operations management, Pearson education,  (2010).

19.   Sterman, J.D. and Dogan, G., "“I’m not hoarding, i’m just stocking up before the hoarders get here.”: Behavioral causes of phantom ordering in supply chains", Journal of Operations Management,  Vol. 39, (2015), 6-22.

20.   Guo, X., Liu, C., Xu, W., Yuan, H. and Wang, M., "A prediction-based inventory optimization using data mining models", in Computational Sciences and Optimization (CSO), 2014 Seventh International Joint Conference on, IEEE., (2014), 611-615.

21.   Keren, B. and Hadad, Y., "Abc inventory classification using ahp and ranking methods via dea", in Stochastic Models in Reliability Engineering, Life Science and Operations Management (SMRLO), 2016 Second International Symposium on, IEEE., (2016), 495-501.

22.   Hadad, Y. and Keren, B., "Abc inventory classification via linear discriminant analysis and ranking methods", International Journal of Logistics Systems and Management,  Vol. 14, No. 4, (2013), 387-404.

Download PDF 

International Journal of Engineering
E-mail: office@ije.ir
Web Site: http://www.ije.ir