IJE TRANSACTIONS B: Applications Vol. 31, No. 2 (February 2018) 339-345   

PDF URL: http://www.ije.ir/Vol31/No2/B/19-2698.pdf  
downloaded Downloaded: 36   viewed Viewed: 354

H. Moradi CheshmehBeigi
( Received: April 28, 2017 – Accepted in Revised Form: October 02, 2017 )

Abstract    In this paper a fast analytical algorithm for design a surface-mounted PM Brushless DC motor (SMPM-BLDC) for variable-speed application based on electromagnetic field analysis and RSM optimization algorithm is discussed. To achieve the desired performance, the physical dimensions of the proposed SMPM-BLDC motor subject to minimal ripple torque utilizing RSM optimization algorithm were optimized. Finally, to evaluate the motor performance and confirm the accuracy of the proposed design procedure 2-D Finite Element (FE) analysis were employed. The obtained numerical analysis results explain the accuracy and effectiveness of the proposed machine design methodology.


Keywords    PMBLDC, Finite Element analysis, analytical model


چکیده    در این مقاله با بهره­گیری از یک روش تحلیلی، طراحی و بهینه سازی یک موتور جریان مستقیم بدون جاروبک برای کاربردهای سرعت متغییر ارایه شده است. برای دستیابی به مشخصات مورد نیاز، ابعاد فیزیکی ماشین با تابع هدف کاهش ریپل گشتاور با استفاده از روش RSM بهینه­سازی شده است. برای نشان دادن کارایی ساختار مورد مطالعه، ساختار BLDC پیشنهادی با یک ساختار مشابه ولی بدون آهنربای دائم مقایسه شده­است. نهایتا برای ارزیابی کارایی ساختار پیشنهادی و دقت پروسه طراحی روش آنالیز عددی المان محدود دو بعدی استفاده شده است. نتایج بدست آمده از آنالیز عددی دقت روش طراحی ساختار پیشنهادی را تصدیق می نماید.


1.      Hendershot, J.R. and Miller, T.J.E., "Design of brushless permanent-magnet machines, Motor Design Books,  (2010).

2.      Gieras, J.F., "Permanent magnet motor technology: Design and applications, CRC press,  (2002).

3.      Hanselman, D.C., "Brushless permanent magnet motor design, The Writers' Collective,  (2003).

4.      Pillay, P. and Freere, P., "Literature survey of permanent magnet ac motors and drives", in Industry Applications Society Annual Meeting, 1989., Conference Record of the 1989 IEEE, (1989), 74-84.

5.      Binns, K. and Shimmin, D., "The relationship between performance characteristics and size of permanent magnet motors", Proc. Elect. Drives Conf., (1995), 423–427.

6.      Huang, S., Luo, J., Leonardi, F. and Lipo, T.A., "A general approach to sizing and power density equations for comparison of electrical machines", IEEE Transactions on Industry Applications,  Vol. 34, No. 1, (1998), 92-97.

7.      Yang, F., Jiang, C., Taylor, A., Bai, H., Kotrba, A., Yetkin, A. and Gundogan, A., "Design of a high-efficiency minimum-torque-ripple 12-v/1-kw three-phase bldc motor drive system for diesel engine emission reductions", IEEE Transactions on Vehicular Technology,  Vol. 63, No. 7, (2014), 3107-3115.

8.      Kam, S.-H. and Jung, T.-U., "A design optimization of asymmetric air-gap structure for small 3-phase permanent magnet spm bldc motor", Journal of Magnetics,  Vol. 20, No. 1, (2015), 91-96.

9.      Jung, J.-W. and Kim, T.-H., "A study on the effect of the magnetization direction on the iron loss characteristics in brushless dc motors", Journal of Magnetics,  Vol. 15, No. 1, (2010), 40-44.

10.    Qu, R. and Lipo, T.A., "Dual-rotor, radial-flux, toroidally wound, permanent-magnet machines", IEEE Transactions on Industry Applications,  Vol. 39, No. 6, (2003), 1665-1673.

11.    Sitapati, K. and Krishnan, R., "Performance comparisons of radial and axial field, permanent-magnet, brushless machines", IEEE Transactions on Industry Applications,  Vol. 37, No. 5, (2001), 1219-1226.

12.    Cheshmehbeigi, H.M. and Khanmohamadian, A., "Design and simulation of a moving-magnet-type linear synchronous motor for electromagnetic launch system", International Journal of Engineering-Transactions C: Aspects,  Vol. 30, No. 3, (2017), 351.

13.    Saavedra Ordóñez, H., Riba Ruiz, J.-R. and Romeral Martínez, J.L., "Multi-objective optimal design of a five-phase fault-tolerant axial flux pm motor", Advances in Electrical and Computer Engineering,  Vol. 15, No. 1, (2015), 69-76.

14.    Vaez-Zadeh, S. and Zamanian, M., Permanent magnet dc motor sliding mode control system, in Magnetic and superconducting materials: Volume 2. 2000, World Scientific.1081-1088.

15.    Ren, Z., "T-/spl omega/formulation for eddy-current problems in multiply connected regions", IEEE Transactions on Magnetics,  Vol. 38, No. 2, (2002), 557-560.

16.    Magnet, C., "Package: User manual", Infolytica Corporation Ltd., Montreal, Canada,  Vol., No. 0.005, (2006), 0.01.

17.    Rippa, S., "An algorithm for selecting a good value for the parameter c in radial basis function interpolation", Advances in Computational Mathematics,  Vol. 11, No. 2-3, (1999), 193-210.

18.             Shin, P.S., Kim, H.-D., Chung, G.-B., Yoon, H.S., Park, G.-S. and Koh, C.S., "Shape optimization of a large-scale bldc motor using an adaptive rsm utilizing design sensitivity analysis", IEEE Transactions on Magnetics,  Vol. 43, No. 4, (2007), 1653-1656.

Download PDF 

International Journal of Engineering
E-mail: office@ije.ir
Web Site: http://www.ije.ir